>Product>Power Meter>Ethernet Power Meter>Solar Electric Din Small Three Phase Power Meter
-big_SOLAR_ELECTRIC_DIN_SMALL_THREE_PHASE_POWER_METER.png)
FU2010 DIN power meter is a multi-function electric solar DIN small three phase power meter without displaying. It can measure all the parameters in three phase system. Simple hardware circuit and high reliability. One DC4-20mA output is optional. It is a versatile transducer. With RS485 port, RTU-Modbus protocol. It's a low-cost power meter, be used in various control system, energy management system, residential power monitoring, industrial automation, smart buildings etc.
■ Airport;
■ Power plant;
■ Industrial system;
■ Intelligent building;
■ Power monitoring system;
■ Photovoltaic power station;
■ Commercial, industrial, utility;
■ Low voltage distribution cabinet;
■ Mobile communication company;
■ Medium and low voltage systems;
■ Industrial and mining enterprises;
■ Energy consumption monitoring system;
■ Electric energy metering of photovoltaic power station;
■ Metering of distribution feeders, generators, capacitor banks and motors;
■ DIN type installation;
■ Small dimension designed;
■ Multi-function power meter;
■ 3P4W, 3P3W wiring modes;
■ Can be as a versatile transducer;
■ Can configurable 5A/1A CT input;
■ RTU-Modbus comunication protocol;
■ Programmable PT/ CT ratio arbitrarily;
■ Simple hardware circuit and high reliability;
■ Economic type without display power meter;
■ With RS485 port, suite for all kinds of baud rate;
| Electrical parameters | |
|---|---|
| Power supply (AC/DC) | AC 85-265V / DC 85-330V or 18-90V DC Power consumption: <3VA |
| Measurement parameters | Voltage (Ph-N); Voltage (Ph-Ph); Current; Frequency; PF; Active Power (W); Reactive Power (Q) ; Apparent Power( S) |
| Computation | Forward active power energy Reverse active power energy Forward reactive power energy Reverse reactive power energy |
| Measuring range | 30-600V, 0-6A, 45-65Hz, -1 ~ 0 ~ 1 |
| Measuring accuracy | Frequency: 0.1% Electric energy: 0.5%, 1.0% Voltage : 0.2%±0.1V Current : 0.2%±0.001A Power : 0.5% ±0.4W Power Factor : 0.5% ±0.001 |
| Display | Indication of power supply, energy pulse and communication. |
| Communication | Support RS485 interface port, 32 (128) networking, Modbus-RTU communication protocol. |
| Analog output (expansion module) | DC 4-20mA output, programmable to any measured parameters. |
| Programmable | Measuring system: 3P4W/3P3W etc; Transformation ratio: PT, CT; Communication: Address: 1-247; Baud: 1200-19200; Parity bit: N/E/O; Energy: reset |
| Connection mode | 3P4W, 3P4W BAL, 3P3W, 3P3W BAL, 1P2W, 1P3W |
| Standard | EN610101:2010; EN61010-2-030:2010; EN61326-1:2013; EN61000-3-2:2014; EN61000-3-3:2013; IEC61000-4; IEC61557-12; IEC60068-2-1/2/30; IEC 62052-11; IEC 62053-21; IEC 62053-22; |
| Mechanical parameters | |
| Dimensions (L x W x H) (mm) | 110x75x68.5 |
| Mounting | 35mm DIN sliding-way or M4 screws |
| Environmental conditions | |
| Temperature | -15 to +55°C |
| Humidity | 20%-95%RH, without condensation |
-big_MULTIFUNCTION_ELECTRICAL_DIGITAL_POWER_METER.png)
-big_ETHERNET_DIGITAL_POWER_METER_WITH_2M_DATA_LOGGER.png)
-big_HIGH_ACCURACY_IP67_OUTDOOR_WATERPROOF_SPLIT_CORE_CURRENT_TRANSFORMER.png){kind=spacer}