APPLICATION

■ Electrical laboratory; ■ EV & Charging pile factory; ■ Metrological service center; ■ Laboratories of power utilities; ■ Third party testing organization; ■ Electricity power bureau & power company; ■ National Metrology and testing department; ■ Charging pile operation and maintenance organization;

FEATURES

■ Forced air cooling;

■ Remote control via CAN bus or serial port;

■ With insulation grounding protection inspection function;

■ The load box has the function of automatic resistance shift;

■ The equipment can be powered supply by mains AC supply or charging pile;

■ It has the functions of emergency stop protection, overcurrent, overvoltage and short circuit protection;

■ Under the rated voltage, the minimum current step is 4.5mA, the minimum power step is 1W, and all have 8192 gears;

■ Realize the power verification points required in JJG 1148-2018 verification regulation for AC charging piles of electric vehicles;

■ Support a variety of working modes, constant current mode, constant voltage mode, constant resistance mode, constant power mode;

■ The box body is equipped with 2 metering sockets meeting the safety requirements, and the loads are controlled through CAN bus;

■ With advanced control algorithm and DSP digital control implementation, it is suitable for various load regulation requirements with high precision, high speed and high stability;

■ The equipment is equipped with voltage and current calibration and correction function, which can calibrate and correct the measured value of the instrument at any time, so as to ensure the measurement accuracy of the instrument used for a long time;

■ Built in temperature sensor, when the temperature in the box is too high, it will actively disconnect the load for high temperature protection, and send out an alarm at the same time. In addition, it can try to monitor the temperature in the box through the communication port;